A weekend of fun

On Thursday April 10 the NCS&SS and the Wilmington Railroad Museum set up their modular layout in the gym of a church activity center/school in Wilmington NC. I arrived at 1 pm and found the first vehicles having just started unloading.The last of the modules arrived somewhere between 2 and 2:30 pm. My modules were the last to be connected at 3:30 and the mainlines were declared tested and operational at 4 pm. Pretty darn good if you ask me.

Here is what 7000 sf of modular HO layout could look like.

A train traveling at about a scale 30 mph would take about 15 mins. to travel the entire length of the mainline.
The layout was packed up and hauled home on Saturday afternoon. The next gig is in September near Charlotte NC.

Sterling Salt

This will be my last post on the subject of weathering freight cars for a while. I'm kind of tapped out on weathering and am back in the mood for doing structures and scenery.

The model is an Atlas Trainman car I found at a trainshow last fall. I have added no details, and modified nothing. All I did was put about 8 hours into the weathering over a span of about 2 weeks.

I think this is my best work thus far.

TLDX 7415 (Cargill) Part 1

I decided to do a posting with more detail on haw I am weathering my freight cars so here it goes.

I'm starting with TLDX 7415. This is an Athearn blue box kit from back when Dinosaurs walked the Earth. This might be an old Bev-bel custom car, could be stock Athearn, I really don't know. I applied some weathering with an airbrush years ago. A little on the body, but mostly on the trucks but the stock wheels have since been swapped out for metal Proto wheels which didn't receive weathering. The paint I used in the airbrush was Floquil, so I'll have to work over it because I can't remove it.

It's not a bad looking car, certainly looks better with some weathering than with none.

With the trucks removed you can see how nice and shiny the wheels are. The truck side frames are pretty bland, mono-color and lack detail.

After separating the wheels from the trucks I soaked the trucks in Dot 3 brake fluid to remove the paint. Then I washed them in warm soapy water and let them dry a few days. Then I applied small strips of masking tape over the axle holes on the inside of the trucks to keep out paint and anything that could fowl the axles. What you see above is the trucks with a coat of flat black automotive primer. the primer will improve the adhesion of the weathering powder to the sideframes. The wheel sets were also painted with primer.

These are the three Acrylic colors I will use to add rust to the car.
From left to right Raw Sienna, Burnt Sienna, and Burnt Umber.

The first color I apply is the Raw Sienna. It is a very good color for what you see when rust is discoloring paint from underneath. On the lower right of the car is a black stripe in the space between the airline and the bottom the the car side. I made the stripe with a fine tip black Sharpy marker. Unfortunately the marker was old and didn't apply an even layer of ink. I had to buy a new one to finish the job.

Here we have the layer of Burnt Sienna applied.

The next three images show the application of Burnt Sienna over the Raw Sienna then Burnt Umber over the Burnt Sienna using the dry brush technique. When I apply the darker color I start in the middle of an area with the Raw Sienna and work my way outward, blending the two colors and fading out with the darker color leaving the lighter Raw Sienna around the edges of the rusty area. I have a set of three brushes that I use exclusively for dry brushing. The brush handles are the same color but different from all the other brushes I have.

After the acrylic paint has dried I seal the car with Dulcoat to preserve what I have.

In this view I have added a thin wash of black using water mixable oil paint thinned with Windex then then dry again sealed with Dulcoat

I think all rollingstock looks best when photographed in it element.

I realize I don't have any images or information on how I weathered the trucks. I lost the images I had taken of the process so I'll have to do that again another time.

Grime & Dirt VI and a lot of rust too

I was looking through some of my books on the Lehigh Valley RR and noticed how decrepit the company's hoppers were by the 1970's. The Lehigh Valley didn't buy modern 70+ ton hoppers because its coal shipping business had been dying since the 1950's and all they had left was a few old 2-bay hoppers. I have had this Athearn blue box hopper for a few years and the only weathering I had done was to beat up the top of the body. I decided to put a real harsh weathering job on this one with lots of rust. I decided not to replace the grabirons or stirrups with wire. This is kind of an experiment to see if a thorough weathering can make chunky details less noticeable. Here is the result, you be the judge.

I used some super fine polishing paper to remove some of the lettering from the car.

The rust is Acrylic paint. The first color I used was Raw Siena which is a very dark brownish yellow. You can see this color at the very edge if the rusty areas. The second color was Burnt Siena for that redish rust. The transition from Raw to Burnt Siena is easy to see in the upper left quadrant above the slope sheet in the first image. The last color is  Burnt Umber which is  a very dark brown. I like Burnt Umber for old pitted rust. All these colors blend together for what I think is a convincing rusty appearance.

For the couplers I apply the colors in reverse order, By using the Raw Siena last I can use it to highlight the edges and detail in the coupler and also create a dusty/rusty look.

Grime & Dirt V

It has been an unusually cold winter for North Carolina. We usually get a a few weekends with temps in the upper 50's and even the low 60's but those days have been coming on week days and it cools off by the time I get home. The last two weeks have been so cold I can't even do any spray painting of sealing outside, which slow down even the weathering of rolling stock. As a result, any projects requiring the use of solvents are stopped cold (pun intended) and the weathering of freight cars has slowed greatly. I think if I change my weathering process a little and do some parts in larger batches (like Dullcoating and priming) then I'll have an inventory of cars waiting for drybrushing and or powders, both of  which I can do indoors.

The latest addition to the re-weathered fleet is this Western Maryland (Chessie System) covered hopper. This one was modestly weathered previously. I was able to remove most of the old weathering because I had used acrylic paint. I switched to acrylics for weathering about 15 years ago and I wish I had switched 20 years earlier. I can strip off acrylic based weathering with a Q-tip dipped in Isopropyl alcohol. The model is a stock Atlas RTR.

This Lehigh & New England is also a re-weather project. I removed most of the old weathering but not all of it would come off. In the end I think the remaining old weathering worked in my favor by adding some texture that I wouldn't and probably couldn't have added intentionally.

I have not added wire grab or stirrups and it's obvious in these images. The car also has a list which you can see in the above image. This is an old Roundhouse kit I built at least 25 years ago and I didn't mount the body to the frame properly. I can't correct the list without the risk of major damage to the body so I'll just leave it as is. If you were to see this car go by in a train you would likely notice it because of the weathering but not see the list and probably not the chunky details.

I picked up this car for $5 and it came with a 40' trailer too. What I really wanted was a flat car to use for drilling my carfloat and  got a trailer for free. I added plenty of weight to the underside before weathering. 

As nice as the wood deck is I would say this car has been re-decked within about 3 years or so. The Pennsy shops didn't bother with repainting though. 

Grime & Dirt IV

This post is really more of an addition to the previous one. I ran out of time on Sunday, so here is some more freight cars I have been working on.

This Milwaukee Road box car was previously weathered with Floquil and an airbrush many years ago. There is really no way to remove the Floquil paint and leave the original paint so I have tried to improve the weathering with some acrylic paint (which I can remove if necessary).

I added some dirt and rust streaking to the side. In hind site I might have had some success toning down the Floquil by adding acrylic washes with a color very close to the factory paint. Maybe next time.

The original roof was light gray. I used paint and some powders to age the roof.

The Milwaukee Road Airslide is a stock Walthers kit. I only added weathering.

This Continental covered hopper is the first of a Proto 4 pack of kits.

I added some cargo spillage to the roof of this car using the same technique as with the N&W covered hopper in the previous post.

The last in this set is PC-890093. I went light on the dirt because it's not supposed to be all that old. I did add a replacement cargo hatch though. I haven't figured out why the background of this image is pink. It was photographed when all the others on this page were.

This Walthers car has wire stirrups added. I also used some powder on the side. 

Grime & Dirt III

It has been to cold to do much structure building and I haven't been in the mood for starting any new structures anyway. I would like to finish up a bunch of the little  unfinished projects I have stashed away but most of them require using solvents I can't use in an non-ventilated room. In the mean time I keep myself busy weathering freight cars, so I'll post some images of those.

I had finished the weathering of this N&W covered hopper a while back but had not taken any images. I decided a couple of weeks ago to come back to this car and add some cargo spillage on the roof and the resulting dark grime down the sides of the car. I didn't want to over do the spillage on this car because I like what I have and I'm not trying to cover up any mistakes.

To represent the spilled cargo I brushed on some Matte Medium then sprinkled some very fine sand. After about 10 minutes I brushed more Matte Medium onto the sand to ensure adhesion to the car. Later I painted the sand with a dark gray and then a little green on top of the gray to give a "rotting grain" kind of look. Lastly I brushed on some thinned gray starting at the top where the grain piles are then down the sides.